Fused Deposition Modelling (FDM)
PLA, PETG, ABS and ASA. For large, low-cost parts.
Get a quoteHow it works
- 01
Plastic filament is fed into a heated nozzle.
- 02
The nozzle lays down thin lines to draw each layer.
- 03
Layers stack up, with supports printed under overhangs.
- 04
Supports are removed and the part is finished.
Best for
- Concept and fit-check models
- Large covers and panels
- Fixtures and display models
Materials
- PLA
- PETG
- ABS
- ASA
Finishes
- Raw
- Sanded
- Primed and painted
Specifications
| Layer height | 0.1 – 0.3 mm |
|---|---|
| Best for | Size and cost over fine detail |
Pranava Fusion offers FDM 3D printing in Hyderabad in PLA, PETG, ABS and ASA. FDM is the lowest-cost way to make concept models, fit checks, fixtures and large parts, and it pairs well with our MJF service when a project moves from early models to strong functional parts.
Choosing an FDM material
| Material | Choose it for |
|---|---|
| PLA | Concept models and display parts. Easy to print with a good finish, but softens at around 55 °C. |
| PETG | Tougher, less brittle parts with good chemical resistance. A good default for functional FDM parts. |
| ABS | Parts that need more heat resistance and can be sanded, glued or vapour finished. |
| ASA | Outdoor parts. Similar to ABS, but resists UV and weather much better. |
Design tips for FDM
- Walls of 1.2 mm or more print reliably and stay stiff.
- Overhangs steeper than about 45° need supports, which leave marks. Chamfers instead of flat overhangs avoid them.
- Parts are weakest between layers, so tell us which direction takes the load and we will orient the part for it.
- Holes printed vertically come out rounder than horizontal ones. Drill or ream holes that need a precise fit.
- Large parts can be split into sections and joined after printing.
FDM or MJF?
Choose FDM when size and cost matter more than fine detail or strength: concept models, large covers, jigs and display pieces.
Choose MJF when the part has to work: snap-fits, load-bearing brackets, drone and robot parts, or batches that must match each other. Not sure? Upload the file and we will recommend a process.
Lead times
Quotes within 1 to 5 hours on working days. Most FDM parts are printed and dispatched within a few days, depending on size and quantity.
FDM questions
What is FDM 3D printing?
Fused Deposition Modelling melts plastic filament and lays it down line by line to build a part layer by layer.
Which FDM materials do you offer?
PLA, PETG, ABS and ASA.
Is FDM strong enough for functional parts?
For light-duty parts, yes, especially in PETG or ABS. For load-bearing or production parts we usually recommend MJF nylon.
Can you print large parts?
Yes. Large parts can be printed in sections and joined. Send the file and we will advise.
How do I get a price?
Upload your files on the quote page. We reply within 1 to 5 hours on working days.
Ready to print?
Upload your CAD files and get a quote within hours.