HP Multi Jet Fusion (MJF)
Strong nylon parts with fine detail, for prototypes and production.
Get a quoteHow it works
- 01
A thin layer of nylon powder is spread across the build bed.
- 02
Print heads jet a fusing agent where the part should be.
- 03
Infrared heat fuses that layer, and the next layer starts.
- 04
The build cools, then parts are depowdered and cleaned.
Best for
- Functional prototypes
- Production batches without tooling
- Drone and robot parts
- Snap-fits, hinges and internal channels
Materials
- PA 12 nylon
- Other materials on request
Finishes
- Raw grey
- Graphite blasted
- Dyed black
- Painted
Specifications
| Build size | 380 × 280 × 380 mm |
|---|---|
| Layer thickness | 0.08 mm |
| Typical accuracy | ± 0.3 mm up to 100 mm |
| Minimum wall | 1 mm |
Pranava Fusion runs HP Multi Jet Fusion (MJF) 3D printing at its manufacturing unit in Ibrahimpatnam, Hyderabad. We print PA 12 nylon parts that are strong enough for end use, from a single prototype to batches of hundreds, and ship them across India and abroad.
MJF is a powder bed process. Because the unfused powder holds every part in place, nothing needs support structures. Parts can be stacked through the whole build volume, which is why MJF is one of the most cost-effective ways to make small and medium batches without tooling.
Why engineers choose MJF
- Strength in every direction: PA 12 parts from MJF behave close to the same along every axis, unlike layer-weak FDM parts.
- No supports: internal channels, snap-fits, hinges and assemblies print in one piece.
- Batch economics: many parts are nested in one build, so the price per part drops with quantity.
- Repeatability: every build is run under our AS9100D quality system, with records for each batch.
- Fine detail: 0.08 mm layers give crisp text, thin ribs and small holes.
Design guidelines for MJF
These are the values we work to for PA 12. Send your file even if a feature is below them: we review every model before quoting and will tell you what will and will not print.
| Feature | Recommended |
|---|---|
| Wall thickness | 1 to 1.5 mm or more (0.5 mm possible on short, supported features) |
| Holes and pins | 1.5 mm diameter or more (0.5 mm is the practical minimum) |
| Gap between parts printed together | 0.6 to 0.7 mm or more |
| Embossed or engraved text | At least 0.8 mm high and deep, 6 pt font or larger |
| Very thick sections | Hollow walls above about 7 mm and add two escape holes for powder |
| Large flat plates | Add ribs or curvature to keep them flat |
| Largest single part | 380 × 280 × 380 mm |
Material: PA 12 nylon
PA 12 is the standard MJF material: tough, stiff, resistant to oils, fuels and most chemicals, and stable at higher temperatures than most printed plastics. See the full PA 12 data on the material page.
Finishes
- Raw: the natural grey of PA 12, cleaned and depowdered.
- Graphite blasted: an even, darker grey matte surface.
- Dyed black: a deep, uniform black that does not chip, because the colour goes into the surface.
- Painted: any colour, for display models and branded parts.
Lead times
We review your files and send a quote within 1 to 5 hours on working days. Once you confirm, parts are printed, finished, inspected against your drawing and dispatched. Finished parts leave us within 24 hours of inspection, by courier across India or by tracked export shipping.
MJF, SLS or FDM?
MJF and SLS both fuse nylon powder and both need no supports. MJF builds faster and gives finer, more consistent detail, which usually makes it the better choice for production batches.
FDM is cheaper for large, simple parts and early concept models, but parts are weaker between layers. For strong functional parts, MJF is usually the right call. Our MJF vs FDM guide compares them in detail.
MJF guides from our blog
- PA 12
PA 12 nylon properties explained: strength, heat and chemical resistance
What PA 12 nylon from HP Multi Jet Fusion can take: strength by build direction, heat, moisture, oils, fuels and skin contact, and where its limits sit.
- MJF
MJF vs SLS: which nylon 3D printing process should you choose?
How Multi Jet Fusion and selective laser sintering differ in speed, powder reuse, colour, strength and cost, and how to pick one for a nylon part.
- MJF
What is HP Multi Jet Fusion? A plain guide for engineers in India
How HP Multi Jet Fusion builds nylon parts layer by layer, what the agents do, which materials it uses and when it is the right process for your part.
MJF questions
What is HP Multi Jet Fusion?
A 3D printing process by HP that fuses thin layers of nylon powder with a fusing agent and infrared heat. It makes strong, detailed parts without support structures.
Are MJF parts strong enough for end use?
Yes. PA 12 MJF parts are used as final parts in drones, robots, vehicles and industrial equipment. They are tough, stiff and resist oils and most chemicals.
What accuracy can I expect?
Typically ± 0.3 mm up to 100 mm. Tighter fits can be reached by adjusting the design or machining a feature after printing.
What colours are available?
Natural grey, a darker graphite-blasted grey, dyed black, or painted in any colour.
Is there a minimum order quantity?
No. We print single prototypes and batches of hundreds.
Where is your MJF machine?
At our manufacturing unit in Ibrahimpatnam, Hyderabad, Telangana. We deliver across India and export abroad.
How do I get a price?
Upload your STEP or STL files on the quote page. We review them and reply with a quote within 1 to 5 hours on working days.
Ready to print?
Upload your CAD files and get a quote within hours.