MJF or FDM: which 3D printing process should you choose?

A plain comparison of strength, surface finish, cost and lead time, and when each process makes sense.

By Pranava Fusion engineering team · · 1 min read · MJF, FDM

We run both HP Multi Jet Fusion and FDM printers, so we get this question every week. The short answer: MJF for functional parts and production, FDM for large, simple parts and cheap early prototypes.

Strength

MJF parts are nearly as strong in the vertical direction as in the horizontal one. FDM parts are built from extruded lines, so they are weakest between layers. For anything that carries load, MJF is the safer choice.

Surface and detail

MJF gives a uniform, slightly grainy matte surface and holds fine features well. FDM shows visible layer lines and needs supports for overhangs, which leave marks.

Cost

For one large, simple part, FDM is usually cheaper. For many small or medium parts, MJF often wins because we pack dozens of parts into a single build.

Lead time

Both are fast. MJF builds take around 12 hours plus cooling and finishing. FDM depends on size and can run from a few hours to a couple of days for big parts.

Our recommendation

Tell us what the part has to do, and we will recommend the process. Send your CAD file through the quote form and we will reply with options for both where it makes sense.

Ready to print?

Upload your CAD files and get a quote within hours.